Removing The Stand; Setting The Tv On The Wall - Sharp Aquos LC 26D6U Operation Manual

Sharp liquid crystal television operation manual
Hide thumbs Also See for Aquos LC 26D6U:
Table of Contents

Advertisement

Appendix

Removing the stand

Before detaching (or attaching) stand, unplug the AC cord from the AC input terminal.
CAUTION
• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
Before attaching/detaching stand
• Before performing work make sure to turn off the TV.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
1
Unfasten the screw used to
secure the bracket in place.
Start from step 2 for the 26 inch model to unfasten the
screws. Note that the shape of each stand differs.
CAUTION
• Do not remove the stand from the TV unless using an optional bracket to mount it.
NOTE
• To attach the stand, perform the above steps in reverse order.

Setting the TV on the wall

CAUTION
• Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper
mounting or mounting that results in accident or injury.
Using an optional bracket to mount the TV
• You can ask a qualified service professional about using an optional bracket to mount the TV to the wall.
• Carefully read the instructions that come with the bracket before beginning work.
Hanging on the wall
Wall mount bracket. (See the bracket instructions for details.)
Vertical mounting
52
2
Unfasten the four screws
used to secure the stand in
place.
Angular mounting
3
(LC-37/32D6U)
Detach the stand from the TV.
(Hold the stand so it will not drop from the edge of the
base area.)
About setting the TV angle
Angle of TV
LC-37D6U
LC-32D6U
(LC-26D6U)
10˚

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents