Sharp Aquos LC 15L1U Operation Manual page 30

BATTERY CHARGE and TRANSMISSION SETTING (Continued)
DISPLAY
SLEEP PIC. FLIP
ENTER
MUTE BRIGHT TV/VIDEO MENU
ENTER/
FLASH-
a/b/c/d
BACK
VOL CH
MENU
Transmission Setting (Continued)
5
Press a/b to move the cursor to
"PRESET", and press ENTER.
6
Press a/b to move the cursor to
"TRANSMISSION SETTING", and press
ENTER.
[2] Setting Channel
Four settings can be selected for the communication channel consisting of
Auto, A, B and C. When set to "AUTO", available channels that can be
transmitted are set automatically. It is recommended to normally set the
communication channel to "AUTO".
AUTO A
1
Press a/b to select "CHANNEL", and
then press ENTER.
2
Press c/d to select "AUTO", and then
press ENTER.
• The available settings change in the
order shown below each time
c/d is pressed.
AUTO A
• "ADJUSTING CHANNEL SETTING." is
displayed on the screen and the
communication channel is set
automatically.
MENU
SLEEP T IMER
V I DEO ADJUST
PRESET
CLOSED CAPT I ON
V–CH I P BLOCK
SET UP
SELECT :
RETURN
TRANSMISSION SETTING
BR I GHTNESS
MTS
AUTO POWER OFF
P I CTURE FL I P
AV2 I N / OUT
BATTERY CHARGE
SELECT :
B C
RETURN
CHANNEL
D I STANCE
SELECT :
RETURN
CHANNEL
D I STANCE
B C
SELECT :
ENTER : EX I T :
ENTER MENU
PRESET
[ BR I GHT ]
[ STEREO]
[ OFF ]
[ NORMAL ]
[ I N ]
ENTER : EX I T :
ENTER
MENU
TRANSMISSION SETTING
[ A] STATUS : A
[ FAR] STATUS : NEAR
ENTER : EX I T :
ENTER MENU
TRANSMISSION SETTING
[ AUTO ]
[ FAR] STATUS : NEAR
ENTER : EX I T :
ENTER MENU
ADJUSTING CHANNEL SETTING.
Displayed in yellow
29