Additional Information - D-Link DWC-2000 Quick Installation Manual

Figure 14. Configure AP
Valid Access Point Summary: Enter the
MAC address of the AP you want to manage.
Figure 15. Enter MAC addresses
3. Save Settings and Connect - When the
WLAN Connection Setup Wizard has been
completed, click the Connect button to save
your settings and connect your APs.
Figure 16. Summary

Additional Information

You can refer to the additional documentation
on the accompanying master CD or you
can visit http://support.dlink.com
for more support on how to configure
your DWC-2000.
• D-Link Wireless Controller User Manual
This manual
operation and control of the wireless
controller firmware
controls the wireless controller hardware.
It includes examples of how to carry out
typical administrative tasks such as setting
up Rogue AP detection and how to use the
wireless controller in various scenarios.
• D-Link Wireless Controller CLI Reference
Guide
This document describes all available text-
based commands that can be used on an
RJ-45 to DB-9 Console or SSH interface to
configure the wireless controller.
Online Support
If there are any issues which are not in the user
manual, please visit http://support.dlink.com,
which will direct you to your appropriate local
D-Link support website.
Warranty Information
The D-Link Limited
information is available at http://warranty.dlink.
com/
online
describes the general
which drives
Lifetime Warranty
and
7