Snapper SXD21SPWM82 Owner's Manual page 9

ASSEMBLY
UNFOLDING AND ADJUSTING LOWER HANDLE (See Figure 2)
W A R N I N G
Folding or unfolding the handle improperly can damage the cables, causing an unsafe operating condition.
• Do not damage the cables when folding or unfolding the handle.
• If a cable is damaged, contact an Authorized Service Dealer.
• Pull and rotate the handle knobs (1) 90° on both sides to loosen the lower handles (2) on both sides.
• Move the lower handles to the operating position. You may raise or lower the handle to a position comfortable for you.
There are 3 positions (3) for you to choose. Release the handle knobs to lock the lower handle into position.
Note: Ensure both sides are set at the same position for proper assembly.
(1)
(3)
(2)
Locked position
Unlocked position
Fig. 2
9