Command Mode - Laird CL024 User Manual

CL024 User Guide
Version 2.0

Command Mode

A radio enters Command mode when data is received over the serial interface from the OEM host and
contains the "AT+++" (Enter AT Command mode) command. Once in Command mode, all data received by
the radio is interpreted as command data. Command Data may exist as either EEPROM Configuration or On-
The-Fly commands. For more information on EEPROM Configuration and On-the-Fly commands, download
the RM024 Embedded Module User Manual).
Figure 1: Pending RF data received over RF
7 CONN-GUIDE-CL024
Americas: +1-800-492-2320 Option 2
Europe: +44-1628-858-940
Hong Kong: +852-2923-0610
wireless.support@lairdtech.com
www.lairdtech.com/ramp