Auto Play - Sharp MD-MT888H Operation Manual

„ Beep sound
You can eliminate the confirmation sound that beeps when
you press a button.

„ Auto play

You can make the unit not play automatically when you insert
a playback-only MiniDisc or an accidental erasure protected
MiniDisc.
„ Auto power save
When the unit is used in a place exposed to much vibration,
sound skipping can be decreased by cancelling the auto
power save function. (Battery will drain faster.)
What is auto power save function?
During playback, maximum 40 seconds (in stereo) of
musical information is stored. Auto power save function
automatically adjusts the storage time between 5 and 40
seconds to reduce the power consumption. If this func-
tion is cancelled, the storage time cannot be adjusted.
z If this unit is used with the AC adaptor, the storage
time will be 40 seconds regardless of the settings.
z The storage time varies depending on the recording
mode.
„ Digital recording level
"D.L 1"
The digital recording level you set will be kept even after can-
celling recording.
"D.L 2"
Every time you cancel recording, the level will return to [D.L
0dB].
„ 3-colour indicators lighting and back-
light on the remote control
"NORM"
3-colour indicators Always flashing
Lit for approx. 10 seconds dur-
Backlight on the re-
mote control ing operation
"ALL"
3-colour indicators Always lit
Backlight on the re- Lit for approx. 10 seconds dur-
mote control ing operation
(Always lit if used with AC
adaptor)
"OFF"
3-colour indicators Not lit
Backlight on the re- Not lit
mote control
01/8/30
MD-MT888H
53
5.fm