Kohler L600 Service Manual page 32

-
FIGURE 9-3 -- DETACH ARMATURE FROM ENGINE
CRANKSHAFT
BY
"BUMPING"
RADIATOR: After draining cooling system,
disconnect outlet hose, inlet hose, belt guard then remove
two mounting bolts and detach radiator from frame
or oil pan base.
GOVERNOR: Disconnect linkage at carburetor, remove two capscrews, slip governor out toward rear
of engine.
CARBURETOR
- AIR CLEANER: Disconnect automatic
choke linkage and hose from valve cover then
detach carburetor (with air cleaner attached) from flange on intake manifold.
.
FUEL PUMP: Disconnect fuel lines,
fuel filter (if used) then detach fuel pump from crankcase.
MAGNETO: Remove high tension leads at spark plugs,
remove two flange mounting capscrews then
remove magneto.
OIL FILLER AND FILTER: Remove filler cap and disconnect oil filtei and bracket (when used) from
right side of crankcase. Remove dipstick,
filler tube and oil gauge.
FIGURE 9-4 -- REMOVING GENERATOR
SUPPORT (FM HOUSING:
FIGURE 9-5 -- REMOVING OIL
PUMP