Quick Installation - Tripp Lite LR604 Owner's Manual

Quick Installation—220/240V - 50/60Hz
Connect your equipment to the
1
Line Conditioner, and the Line
Conditioner to an electrical
outlet.
• Using the power cord from your equipment,
connect your equipment to the Line
Conditioner (See
• Using the supplied power cord, plug cord
into the Line Conditioner's input (rear) and
then into a wall outlet (See
use the supplied Schuko adapter when
connecting to the wall outlet.
Connect additional equipment
2
to the Line Conditioner in the
same manner.
• Additional cords and receptacle adapters
are available at www.tripplite.com to
accommodate most outlet configurations.
Turn on your Line Conditioner's
3
power switch
Note: Source Voltage Matching Switch—Set
the Source Voltage Matching Switch to either
208, 220 or 240 volts to match the input
voltage being used (select models).
18-12-183-931350.indb 3
).
A
). If needed,
B
3
A
B
12/20/2018 5:04:56 PM