Related Manuals for Sonoff Slampher
Summary of Contents for Sonoff Slampher
- Page 1 SLAMPHER USER GUIDE Hi, welcome to use Slampher RF！ 1. Download “eWeLink” app. Search “eWeLink” in APP Store for iPhone or Google play for Android. 2. Screw Slampher with E27 light bulb. 3. Add device...
- Page 2 1. Power up the device after you complete the installation. Press the pairing button once to turn off the lamp first. 2. Press the button for 7 seconds until the green LED fast blinks. Due to this model has used different firmware and module, the led has two blinking ways.
- Page 3 When the green LED on, the device is “Online”, if eWeLink shows still “Offline”, please close eWeLink and re- open. 433MHz remote control (Sonoff RF module) For the old models that deliver before June 1st, 2018, please learn as below: 3.1.
- Page 4 For the new models that deliver on and after June 1st, 2018, please learn as below: Press and hold the pairing button on Slampher for 3s, you see the red led blinks once. Press a button on RF Remote, and it will be learned successfully.
- Page 5 2. Share Control The owner can share the devices to other eWeLink accounts. While sharing devices, both should stay online on eWeLink. Because if the account you want to share is not online, he/she will not receive the invitation message. How to make it possible? Firstly click Share, input the eWeLink account (phone number or email address) you want to share, tick the timer permissions (edit/delete/change/enable) you want to give, then click Next.
- Page 6 4. Scene/Smart Scene Scene allows triggering on/off your devices automatically. Scene Settings is in the upper right corner of Device List. You can set up scenes or smart scenes to trigger on/off the device. Users should select “Click to execute” in the condition, add different existing devices, name the scene and save it.
- Page 7 At the same time, please power off the device if you can, then power up to try again. 3. My WiFi is expired, can I connect the devices to LAN? Answers: the Slampher supports to be controlled by LAN(Update in 15/10/2017, LAN function has been stopped).
Need help?
Do you have a question about the Slampher and is the answer not in the manual?
Questions and answers