Advertisement
When unpacking, check to make sure all parts shown on the Parts List (page #8) are included.
If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the
cover of this manual as soon as possible.
Mini Sewing Machine
The Mini Sewing Machine is compact, lightweight and portable. It comes with 102 color spools of
thread, a foot control and a #14 sewing machine needle. This machine takes up very little storage
space and can meet all your basic sewing needs.
INSTRUCTIONS
Setting Up the Mini Sewing Machine
1.
With the Mini Sewing Machine facing you, place on a sturdy, flat surface, making sure
it is in the "Off" position. See Figure 1.
Figure 1
2.
To place batteries in the Mini Sewing Machine, tilt the machine on it's side as shown
in Figure 2. Remove Battery Door on the underside of the machine and place 4 AA
batteries in the designated positions or you can use a Power Adapter (not provided)
and plug it into the 6V DC jack located on the right side of the machine. Replace
Battery Door.
3.
When using the Foot Petal, plug in the Foot Petal Plug on the end of the cord into
the jack under the DC jack and place the Sewing Machine in an upright position.
Place Foot Petal on the floor under your table and within easy reach. Turn the
machine "On".
Threading the Mini Sewing Machine
1.
Place the white plastic Spindle in the Spindle hole located on the top of the Sewing
Machine. Place the Spool of Thread you wish to use on the Spindle. Give the
spool of thread a few turns in order to release at least 8 inches of thread.
See Figure 1.
SKU 90216
UNPACKING
Spindle-Holder
for Thread
On/Off
Switch
High/Low Switch
Battery Door
(Continued on next page).
Batteries
PAGE 3
Figure 2
DC Jack 6V
Adapter
Jack
Foot
Petal
Jack
Foot
Petal
Advertisement
