Advertisement
Quick Links
MINI SEWING MACHINE
ASSEMBLY & OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
®
Copyright © 2003 by Harbor Freight Tools
. All rights reserved. No portion of this manual
or any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For technical questions please call 1-800-444-3353
Advertisement
Related Manuals for Harbor Freight Tools 90216
Summary of Contents for Harbor Freight Tools 90216
- Page 1 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at http://www.harborfreight.com ® Copyright © 2003 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
-
Page 2: Specifications
REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only identical replacement parts. Only use accessories intended for use with this product. Approved accessories are available from Harbor Freight Tools. MAINTAINING PRODUCT. This is a delicate/precision instrument. Keep clean and dry. Any repairs should be done by qualified technicians only. Do not attempt to disassemble this product as all its components are assembled and adjusted accurately in the factory. - Page 3 When unpacking, check to make sure all parts shown on the Parts List (page #8) are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
- Page 4 Keep fingers and objects away from the needle. When the Bobbin is completely filled with thread, cut the thread and remove the Bobbin and the Bobbin Pin from the Hand Wheel. Figure 6. SKU 90216 PAGE 4...
- Page 5 Metal Bobbin machine using the previous steps. With practice thread- Bottom Bobbin ing will become easier. Holder If knotting occurs, try re-threading top and bottom threading instructions. Bobbin Case Figure 10 SKU 90216 PAGE 5...
- Page 6 Loosen the Needle Clamp Screw (Figure 14). Replace a broken or damaged needle. When inserting a new needle be sure the flat side of the needle is facing the Clamp Screw and push it as far upward as possible. Then tighten the Needle Clamp Screw. SKU 90216 PAGE 6...
- Page 7 Note: Be sure the Sewing Machine is in the “off” position when not in use. This wil prevent accidently starting the machine with the Foot Pedal. Be sure children are kept away from the Sewing Machine unless under supervision. SKU 90216 PAGE 7...
- Page 8 BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACE- MENT PARTS THERETO. SKU 90216 PAGE 8...