Advertisement
ITEM
Sewing Machine Model
Materials
Colors
Power/Speed Switch
Battery Requirements
Overall Dimensions
Net Weight
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram. Keep your
invoice with this manual. Write the invoice number on the inside of the front cover. Keep
the manual and invoice in a safe and dry place for future reference.
1.
KEEP PRODUCT USAGE AREA CLEAN. Cluttered areas invite injuries.
2.
KEEP CHILDREN AWAY FROM PRODUCT USAGE AREA. This is not a toy and
may cause injury if not used with care. Do not allow children to handle this product
unsupervised.
3.
TO AVOID RISK OF PERSONAL INJURY, EQUIPMENT DAMAGE, FIRE AND SHOCK,
make sure your work area is free of damp, wet or rainy conditions. Do not mix standard,
rechargeable or alkaline batteries and replace all batteries at the same time–do not mix old
and new batteries. Check batteries periodically and remove them from the machine when
not in use for an extended period of time.
6.
CHECK FOR DAMAGED PARTS. Before using this product, carefully check that it
will operate properly and perform its intended function. Check for damaged parts and
any other conditions that may affect its operation. Replace or repair damaged or
worn parts immediately. Do not tug fabric while sewing as this may cause needle to break.
7.
REPLACEMENT PARTS AND ACCESSORIES. When servicing, use only identical
replacement parts. Only use accessories intended for use with this product.
Approved accessories are available from Harbor Freight Tools.
8.
MAINTAINING PRODUCT. This is a delicate/precision instrument. Keep clean and dry.
Any repairs should be done by qualified technicians only. Do not attempt to disassemble
this product as all its components are assembled and adjusted accurately in the factory.
Do not use this product for any purpose other than which it was intended.
SKU 90216
SPECIFICATIONS
#XJ-2K416
2-Piece Injected Mold ABS Case
ABS Knob, Switches, Foot Control, Low Carbon Steel
Components, Plastic Spools and Bobbin Housing.
White Case, Blue Knobs, Black Foot Pedal,
Purple Bobbins
On/Off
4 Double AA Batteries, 1.5 V D/C each (not included)
8-1/2" X 4"W X 7-1/4"H
2 Lbs.
SAVE THIS MANUAL
SAFETY WARNINGS AND PRECAUTIONS
DESCRIPTION
PAGE 2
Advertisement
