Changing Dab Options - PURE DMX-60 Owner's Manual

Table of Contents

Advertisement

Changing DAB options

MENU > DAB
Guide settings
Change the way the programme guide information is handled:
Current multiplex only Displays latest broadcast information from current multiplex only
Store guide to SD card Displays latest programme guide information on the SD card if
Autotune
Scans for DAB stations and adds any new ones to the station list.
Station order
Alphanumeric
Favourite
Active
Multiplex
Trim stn list
Favs
presets
Manual tune
Shows DAB signal level which can help you find the best position for your radio.
1.
Select the channel you want from the list. You see a signal strength display.
The marker indicates the minimum required level for reception and the filled blocks
indicate the current level.
2.
Move your aerial and try to raise the current level to the marker or beyond. You see the
multiplex name at the top of the screen if a good signal is received and the stations in
that multiplex are listed below and added to the station list.
3.
Select a station or press INFO or MENU to exit manual tuning.
DRC
DRC (Dynamic Range Control) value makes the quieter sounds in a DAB broadcast easier to
hear at low volume or in a noisy environment. Check with the broadcasters to find out if they
use DRC.
DRC OFF
DRC HALF
DRC FULL
available. Programme guide information from all multiplexes is stored
to a folder called 'GUIDE' on the SD card and automatically updated
when new information is broadcast. This is also updated if the unit is
in standby.
Lists all stations in alphanumeric order.
Displays your eight most listened to stations first on the station list. Your
favourite stations display a heart next to the names in the station list.
Lists active stations first on the station list.
Lists stations in groups according to their multiplex.
Removes inactive stations from the station list.
Available only when Favourite station order (above) has been selected.
Transfers your eight favourite stations to presets.
DRC is switched off. Any DRC level broadcast is ignored.
DRC level is set to half that sent with the broadcast.
Applies the DRC level as sent with the broadcast.
9

Advertisement

Table of Contents
loading

Table of Contents