7.2 Troubleshooting
7.3 Maintenance
The following inspections and maintenance tasks are recommended at least two times per year for best performance.
Make sure no block on air-flow around the controller. Clear up any dirt and fragments on radiator.
█
Check all the naked wires to make sure insulation is not damaged. Repair or replace some wires if necessary.
█
Tighten all the terminals. Inspect for loose, broken, or burnt wire connections.
█
Check and confirm that LCD is consistent with required. Pay attention to any troubleshooting or error indication .Take
█
corrective action if necessary.
Confirm that all the system components are ground connected tightly and correctly.
█
Confirm that all the terminals have no corrosion, insulation damaged, high temperature or burnt/discolored sign, tighten
█
terminal screws to the suggested torque.
Check for dirt, nesting insects and corrosion. If so, clear up in time.
█
WARNING: Risk of electric shock!
Make sure that all the power is turned off before above operations, and then follow the
corresponding inspections and operations.
17