Connection Of Headphones (Commercially Available); Connecting The Monitor To A Power Source; Turning The Power On - Sharp LL-191A Operation Manual

Connecting the monitor and turning the monitor on and off
Connection of headphones
(commercially available)
Headphones (commercially available) can be
connected.
Headphone terminal
Notes:
- When the headphones are connected, no sound
can be heard from the monitor speakers.
- Use headphones with a cable less than 3 m in
length.
Connecting the monitor to a power
source
Power terminal
Headphones
AC outlet
Power cord

Turning the power on

1. Turn on the main power of the monitor.
Main power switch
- When switching the main power switch on and
off, always wait for an interval of at least 5
seconds. Rapid switching may result in
malfunction.
2. Press the monitor's power button.
3. Turn on the computer.
Press power button.
When a signal is input from the computer, the
power LED lights up green, and the screen is
displayed. (After power is turned on, it may take
a little time until the screen is displayed.)
Notes:
- If using the monitor for the first time or after
having changed the system settings during use,
perform an automatic screen adjustment. (p.18)
- Depending on the type of computer or OS, you
may need to install the monitor set-up
information on your system. (p.26)
- When connecting to a notebook, if the notebook
computer's screen is set to display at the same
time, the MS-DOS screen may not display
properly. In this case, change the setting to
display only the LCD monitor.
14
Turn on the
computer power
supply.
ON