Variobot varikabi Manual page 89

Problem
varikabi only drives straight
ahead.
The two LEDs do not light up.
varikabi gets stuck on the ground.
If none of these causes apply to your problem, check carefully that all components are
installed as described in the construction plan.
If you need help, please contact us with a detailed error description and preferably a
photo of your robot:
Possible Reasons
• The center sensor is connected incorrectly.
• One or both LEDs are inserted with the wrong
• varikabi is not placed well or too uneven on the
• The surface is too bumpy for varikabi.
info@variobot.com
polarity.
cable ties.