Table of Contents
Advertisement
Wentworth
Laboratories
3.4
Cable Managment
Cable management is important to the performance of the Pegasus Probe. The cable
from the tester should be attached directly to the connector provided on the side of the
Pegasus Probe body and anchored to the side of the body as shown. Connecting the
tester cable directly to the needle can influence the performance of the Pegasus Probe,
which may be detrimental to the quality of probe mark.
Ensure cable between connector and
probe holder is loose
PEGASUS Operating and Service Manual
Fig 6. Tester Cable Management
7
Tester cable anchored to body
Advertisement
Table of Contents
