Setup For Use (General Images Shown For Reference Purposes Only); Install Rotisserie; Apply Sign Graphics - Gold Medal 5552-00-000 Instruction Manual

Humidified Merchandiser
Combo
Setup for Use
(General images shown for reference purposes only)
Step 1: Remove all
packaging and tape. Set
unit on a level surface.
Step 4: Slide Drive Connector
(slotted end down) onto top
of rack shaft; insert Hitch Pin.

Apply Sign Graphics

Step 1: Peel paper
backing off Graphic
before applying to a
clean cabinet panel.
Reference Electrical Specifications to connect the unit to a power source. Unit should be cleaned prior to
use (reference Care and Cleaning section of this manual).
Model No. 5552-00-000
Step 2: Remove Thermometer
from pack (keep holder); insert
into holding bracket.
Step 5: Place rack into unit;
set bottom of rack shaft into Rotator Cup, then lift Drive
Connector up onto motor shaft, and secure with hitch pin.
Step 2: Hold graphic
taught and align with
top edge of unit; press
top corners to cabinet.

Install Rotisserie

Step 3: Remove Rotisserie
Support Tray and assemble Rotator
Cup as shown; reinstall Support.
1
1
2
Step 3: Hold top center to
unit; evenly press down
and outwards from center
of sign to bottom corner.
Page 7
3
2
Step 4: Repeat center
to bottom corner
pressure to apply
other side of sign.
gmpopcorn.com