Table of Contents
Advertisement
Humidified Merchandiser
Combo
Replacing Broken Glass
Broken glass panels can be easily replaced. Gold Medal Products Co. does not ship glass. It can be
obtained from a local glass shop, always purchase tempered glass.
GLASS DIMENSIONS (Height x Width x Thickness)
Front and Side Glass: 18.063" x 14.875 x .125" (3 Pieces)
1. Turn machine OFF, unplug unit and allow it to cool completely before attempting to
replace glass.
2. Carefully remove all loose pieces of broken glass.
3. Slide glass panel up under top ridge, then swing bottom of panel out and lower it away
from unit (see Figures A and B below).
4. Carefully remove the rest of the broken glass and clean unit thoroughly.
5. Remove all rigid glass channels from around glass to be replaced, set channels aside
for reuse.
6. Slide rigid glass channels over exposed edges of new glass panel.
7. Carefully slide new glass panel up under top ridge, then lower it into the bottom channel.
8. Reinstall all pans for use.
Figure A - Slide glass panel
up under top ridge.
General images shown for glass installation reference only.
Model No. 5552-00-000
Figure B – Swing bottom of
glass panel out, then lower
it away from unit.
Page 15
gmpopcorn.com
Advertisement
Table of Contents
