Manual Pause Calling - Samsung R520_CJ16_MM_111009_F4 User Manual

Call Another Country — Shortcut Method
In Standby mode, press and hold
1.
until a plus sign (+) appears in
the display.
Note: When you press , your phone
automatically replaces this
three-digit exit code for the United States.
Enter the country code for the
2.
country to call, or press and hold
until a second plus sign (+)
appears in the display.
Tip: If you place most or all of your international
calls to numbers in the same country, set-up
the International Dialing shortcut to
automatically dial that country's code. (For
more information, refer to "International
Dialing" on page 123.)
21
+
with 011, the
Note: When you press , your phone automatically replaces the second
with the two-digit country code you selected as the International
Dialing shortcut.
3. Enter the number to call, then press

Manual Pause Calling

When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
To manually call a number with pause(s) without storing the
number to Contacts:
Enter the number you wish to call.
1.
Press the Options soft key. A pop-up menu containing the
2.
following options appears in the display:
• 2-Sec Pause — P pause — A two-second pause stops the
calling sequence for two seconds and then automatically sends the
remaining digits.
• Wait — W pause — A hard pause stops the calling sequence until
you press .
Highlight the desired pause option.
3.
+
.