Table of Contents
Advertisement
DVG-2102S User's Manual
Rear Panel
1.
Power Receptor: Receptor for the provided power adapter.
2.
WAN: Connect to your broadband modem using an Ethernet cable or
enabled computers using Ethernet cabling.
3.
Phone Port (1-2): Connect to your phones using standard phone cabling (RJ-11).
WARNING:
DO NOT
your VoIP Telephone Adapter.
Use Reset Button to restore factory default settings:
1.
Power on.
2.
Press and hold the reset button for 5 seconds.
3.
Release the reset button. Factory settings will be restored.
D-Link Systems, Inc.
connect the phone ports to each other (FXS to FXS). Doing so may damage
Telephone Interface Description
connect to your Ethernet
6
Advertisement
Table of Contents
