Miele DA 2558 Operating And Installation Instructions page 44

a 1 collar for exhaust ducting
 150 mm.
b 1 reducing collar for exhaust
ducting  125 mm.
c 1 Connector for flat ducting to the
rear or the side (only for EXT
models).
d Conversion kit for recirculation
mode (the conversion kit is not
supplied and must be ordered
separately; see "Technical data").
The kit contains an exhaust grille
and aluminium hose with hose clips.
3.5 x 16 mm screws for securing the
cooker hood.
The screws supplied are intended for
securing the cooker hood to a solid
wooden cabinet floor with a
minimum thickness of 16 mm.
Ensure the cabinet floor can
permanently support the weight of
the appliance.
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Keep the following in a safe place:
Installation plan
1 lever
for replacing the lamps.
Installation
43