Hold Function
IM-DR420H
The operation can be kept even if other buttons are accidentally pressed in a place such as a crowded train. (The main
unit and remote control operate independently.)
Hold down the HOLD button for 2 seconds or more.
Hold
If the battery is inserted or the AC adaptor is connected,
you can set this function even when the power is turned
off.
To cancel the hold mode
Press and hold down the HOLD button for 2 seconds or
more whilst the unit is in the hold mode.
"HOLD OFF" will be shown.
16
IM-DR420H(E) TINSE0554AWZZ
Move the HOLD switch to the safety position
(direction indicated by the arrow).
Orange mark
Hold
Release
To cancel the hold mode
Move the HOLD switch away from the safety position (the
opposite direction of the arrow).
If the hold function is active whilst the power is turned
off, the power cannot be turned on by mistake and the
battery will not be drained.
03/7/21
Release
IM-DR420H_UK_2.fm