Device Overview - joke mikromat 600 eco Instruction Manual

5

Device overview

Intended use
The device is intended for abrasive material processing by fine blast-
ing with various blasting media.
Among others, the following blasting processes are possible:
•
•
•
•
•
•
•
•
The application possibilities are versatile by:
•
•
Scale removing after hardening.
Smoothing of plastic and diecasting moulds, compression
moulding dies and embossing dies.
Shot peening of wearing parts.
Derusting and removing of lacquer of/from components.
Deburring of metal components after machining (e.g. turn-
ing, drilling, milling) and of duroplastic mouldings from injec-
tion moulding and shaped casting).
Cleaning of plastic and rubber moulds, welds and soldered
parts.
Preparation of surfaces for paint spraying, gluing and elec-
troplating.
Matting and brightening (decorative blasting).
Use of mixed grit and glass bead blasting shots.
Use of different grid sizes:
The precisely balanced relationship between the dosing cup
and blasting gun in addition to the special filter system allows
the use of all commercially available blasting media. Grit sizes
of between 1 mm (approx. 20 mesh) and 0.01 mm (approx.
400 mesh) can be processed.
J O KE
®
F i n e d r y b l a s t i n g u n i t m i k r o m a t 6 0 0 e c o
i n s t r u c t i o n m a n u a l 8