Advertisement
Connecting the speakers is the next step. The RZRHARNESS3 front channels are designed to
be used with the RZRPOD65 front speakers and have all-weather connections that are easy
to connect. The white and white/black wires can be connected to the front left side speaker.
The all weather connections match the wire harness on the RZRPOD65 and can be connected
easily. The grey and grey/black (positive and negative) are for the front right speaker and can
be connected in the same way. The rear speaker wires are designed for use with the MTX
MUD65P pod speakers so both the left and right leads in the RZRHARNESS3 have both audio
signal and power (for powering the LED in each speaker) wires. The green and green/black
(positive and negative) are for the left rear speaker. Green will connect to grey on the speaker
and green/black will connect to grey/black for signal. Red from the RZRHARNESS3 will connect
to yellow on the speaker and black will connect to black. The purple and purple/black (positive
and negative) are for the right rear speaker. Purple will connect to grey on the speaker and
purple/black will connect to grey/black for signal. Red from the RZRHARNESS3 will connect
to yellow on the speaker and black will connect to black. Since there is a variety of locations
rear speakers can be mounted, these wires can be cut to match the length needed to reach the
desired mounting location.
Finally, the power and ground wire can be connected to the battery. Connect the red wire
power ring to the positive battery terminal and black ring terminal to the negative battery
terminal. Turn machine to "ACC" or "ON" and power on the AWMC3 to ensure all speakers are
working properly.
Discover other powersports sound systems on our website.
Advertisement
