Download Print this page

MTX RZRHARNESS3 Installation Instructions page 2

Advertisement

IMPORTANT NOTICE
When connecting power and ground wires ensure that the red power wire is fused at the
point where it is connected to the vehicle's battery. Failure to do so can result in damage to
the vehicle if a short circuit develops between the vehicle connection point and the product.
INTRODUCTION
The MTX RZRHARNESS3 is designed to work with the MTX AWMC all-weather media
controller, MUD100.4 Amplifier, RZRPOD65 speakers, MUD65P speaker pods, and RZRXP-10
powered subwoofer in select Polaris RZR vehicles. The harness is designed to simplify
installation of all of these parts for a complete audio system. These instructions are designed
specifically for the RZRHARNESS. See other part installation instructions for details on how to
install them in their locations.
FITS THE FOLLOWING VEHICLES
• RZR
XP / XP4 1000 (2014 and Up)
®
• RZR
XP / XP4 TURBO (2016 and Up)
®
• RZR
900 / 900S / 1000S (2015 and Up)
®
• RZR
4 900 EPS (2015 and Up)
®
RZRHARNESS3 SYSTEM LAYOUT
RZRPOD65 Left
AWMC3
Ignition
MUD100.2
Amplifier
MUD65P Rear
Left Speaker
RZRPOD65 Right
MUD65P Rear
Right Speaker
Battery
RZRXP-10
Subwoofer

Advertisement

loading