Advertisement
Quick Links
Advertisement
Related Manuals for MTX RZRHARNESS3
Summary of Contents for MTX RZRHARNESS3
- Page 1 INSTALLATION INSTRUCTIONS RZRHARNESS3...
- Page 2 INTRODUCTION The MTX RZRHARNESS3 is designed to work with the MTX AWMC all-weather media controller, MUD100.4 Amplifier, RZRPOD65 speakers, MUD65P speaker pods, and RZRXP-10 powered subwoofer in select Polaris RZR vehicles. The harness is designed to simplify installation of all of these parts for a complete audio system.
- Page 3 INSTALLATION The first step in installing the RZRHARNESS3 is to remove the seats, center console, under dash, and instrument cluster from the RZR. Once those pieces are removed, a large grommet located on the forward firewall can be seen that includes the factory wiring harness. After carefully making a small incision feed the end of the RZRHARNESS3 through that grommet leading with the end that includes the black and red ring terminals.
- Page 4 The grey and grey/black (positive and negative) are for the front right speaker and can be connected in the same way. The rear speaker wires are designed for use with the MTX MUD65P pod speakers so both the left and right leads in the RZRHARNESS3 have both audio signal and power (for powering the LED in each speaker) wires.