Introduction; Operation And Maintenance Manual; Precautions; Symbols - Datex-Ohmeda Tec 5 Operation And Maintenance Manual

1.0

Introduction

1.1

Operation And Maintenance Manual

This Operation And Maintenance (O&M) Manual contains the information required in order to install,
operate and maintain the Tec 5 Continuous Flow Vaporizer.
Requests for servicing facilities, advice or assistance must be addressed either to a local Datex-Ohmeda
Field Operations Unit or to an Datex-Ohmeda Authorised Distributor.
Additional copies of this manual, quoting Tec 5 Continuous Flow Vaporizer O & M Manual Part No.
1105-0100-000, can be requested from a local Datex-Ohmeda Field Operations Unit or from an Datex-
Ohmeda Authorised Distributor.
It is recommended that all relevant documentation, including the O & M Manual and accompanying
labels and/or inserts, is immediately available to all prospective operators.
1.2

Precautions

A number of Warnings and Cautions are used throughout this manual to draw attention to the possible
hazards and/or adverse conditions which may occur if the information and instructions provided are not
strictly observed.
Cautions and Warnings are preceded by a
which can endanger either the patient or the operator and can result in damage to the equipment.
Special attention must be paid to each Warning and Caution as it appears in the manual.
1.3

Symbols

Tec 5 Vaporizer
O & M Manual Part No. 1105-0100-000
w
Systems with this mark agree with the European Council Directive (93/42/EEC) for
Medical Devices when they are used as specified in their operation and maintenance
manuals. The xxxx is the certification number of the Notified Body used by
Datex-Ohmeda's Quality Systems.
European Union Representative
symbol and are used to draw attention to a condition
Page 1
August 1999