3. The traverse operation signal can be sent from inverter to external devices.
Assign the function No. 124 / 125 [inverse] (traverse in progress) and 126 / 127 [inverse] (traverse
deceleration in progress) to the output terminals.
Output terminal selection parameter: f130 to f132，f137，f138
Output the traverse in progress signal from the terminal RY-RC.
Output the traverse deceleration in progress signal from the terminal OUT.
Output terminal selection 1A
Output terminal selection 2A
Output frequency (Hz)
Traverse in progress
Traverse deceleration in progress
Fig. 5 Traverse output signals
(Traverse in progress)
Example of setting