System Setting - LENCO TFT-1028 User Manual

OSD Language
Select an OSD language.
Audio Language
Select the preferred audio language for watching TV channels. If the language is not available, the default
program language will be used.
Subtitle Language
Select the preferred subtitle language.
Digital Audio
Set the desired audio format at the HDMI slot: PCM, Raw HDIM On, Raw HDMI Off, Off (if available).
System Setting
To access the Menu,press SETUP and select [System].The menu provides options to adjust the system settings.
Press the UP/DOWN key to select an option and press RIGHT/LEFT to adjust the setting. Press EXIT to exit the
Menu.
Set Password
Set or change the password for Locked programs. Enter your old Password or the default password'000000'.You
will then be asked to enter your new password. To confirm re‐enter your new password. Once it is confirmed,
press EXIT to exit the Menu.
Master password '888888'
Restore Factory Default
Reset your Set Top Box to the Default Factory Settings.In Main Menu select [Restore Factory Default]and press
OK or RIGHT to select. Enter your password or the default password '000000' and press OK to confirm. This
option will delete all preset channels and settings.
Information
View model, hardware and software information.
Software update
Software update
USB
To access the Menu, press the SETUP button and select USB.
Multimedia
Switch to USB mode and plug in USB to view files.
Photo Configure
Set the parameters for viewing photographs.
Movie Configure
Set the parameters for displaying movie subtitles.
13