LENCO TFT-720 Manual
  1. Manuals
  2. Brands
  3. LENCO Manuals
  4. Portable TV
  5. TFT-720
  6. Manual
LENCO TFT-720 Manual

LENCO TFT-720 Manual

7” dvb-t player
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Introduction

Thank you for choosing the 7" DVB-T Player. The unit applies the latest
state of the art electronics and is designed for use in hotels, offices,
vehicles or your home. The unit is constructed to provide years of reliable,
trouble-free service, and is compact so that you can take it with you
anywhere and is designed for quick and easy setup.
Please read all
documentation prior to using this product. The documentation will assist
you in obtaining the best equipment performance. Save this manual for
later use.
Important Notice
It is unlawful in most jurisdictions for a person to drive a motor vehicle
which is equipped with a television viewer or screen that is located in the
motor vehicle at any point forward of the back of the driver's seat, or that
is visible, directly or indirectly, to the driver while operating the vehicle.
In the interest of safety, this system should never be installed where it will
be visible, directly or indirectly, by the operator of the motor vehicle.
Safety Precaution
For safety reasons, when changing video media, it is recommended that
the vehicle is not in motion, and that you do not allow children to unfasten
seat-belts to change video media or make any adjustments to the system.
Enjoy your entertainment system but always remember: safety of all
passengers remains the number one priority.
- 1 -

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TFT-720 and is the answer not in the manual?

Questions and answers

Related Manuals for LENCO TFT-720

Summary of Contents for LENCO TFT-720

  • Page 1: Introduction

    Introduction Thank you for choosing the 7” DVB-T Player. The unit applies the latest state of the art electronics and is designed for use in hotels, offices, vehicles or your home. The unit is constructed to provide years of reliable, trouble-free service, and is compact so that you can take it with you anywhere and is designed for quick and easy setup.

  • Page 2: Important Safety Instruction

    Important Safety Instruction The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
  • Page 3 Important Safety Instruction NOTES Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Maintain well ventilated conditions around the product. Do not put product on bed, sofa or anything that blocks ventilation. Install according to the manufacturer’s instructions.

  • Page 4: Function Features

    Function Features This unit incorporates analog TV and portable DVB-T receiver in one system. DVB-T receiving function DVB-T signal reception. CATV receiving function Can be connected to the CATV antenna for receiving CATV signal. Radio receiving function Receiving DVB-T radio signal via the external antenna. EPG function PG (Electronic Program Guide) function.

  • Page 5: Table Of Contents

    Table Of Contents Introduction--------------------------------------------------------------------------------------------- Important Safety Instruction----------------------------------------------------------------------- Function Features ------------------------------------------------------------------------------------ Table of Contents-------------------------------------------------------------------------------------- Unit Introduction -------------------------------------------------------------------------------------- Main Panel ---------------------------------------------------------------------------------------------- Rear Panel----------------------------------------------------------------------------------------------- Remote Control---------------------------------------------------------------------------------------- Preparation of Remote Control ------------------------------------------------------------------ Rechargeable Battery-------------------------------------------------------------------------------- System Connections--------------------------------------------------------------------------------- Power Supply Connection --------------------------------------------------------------------------- Connecting to a TV ------------------------------------------------------------------------------------- Connecting to an Amplifier---------------------------------------------------------------------------- Connecting to a DC Adapter ------------------------------------------------------------------------ Connecting to a Headphone-------------------------------------------------------------------------...

  • Page 6: Unit Introduction

    Unit Introduction Main Panel STANDBY button Press to enter or exit the standby mode. MENU/SETUP button Press to enter or exit the setup menu. CH－/ button In TV or DVB-T mode, press to select channel. In the menu, press to adjust the value. CH +/ button In TV or DVB-T mode, press to select channel.

  • Page 7: Rear Panel

    Unit Introduction 10. Fixing jack Used to connect to the external antenna. 11. TV Antenna jack Used to connect to the antenna and the connecting line of CATV. 12. DVB antenna jack Used to connect to the DVB-T antenna. 13. LCD screen 7"...

  • Page 8: Remote Control

    Remote Control Remote Control 1. STANDBY button Press to access or exit standby mode. 2. INFO Press to display the status information. The screen that appears will disappear automatically after a few seconds. MENU button In DVB mode, press to enter or exit the setup menu. 4.
  • Page 9 Remote Control EXIT button In the DVB-T mode, during setting, press to return to the previous menu. 7. 0-9 numeric buttons Select numbers by pressing these buttons. button Press to enter the favorite list, and then use the direction button to select, then press the OK button to confirm and start playback.

  • Page 10: Preparation Of Remote Control

    Preparation of Remote Control Preparation of remote control Usage of remote control • For best results, please aim the remote refer to the drawing below, take out control directly at the unit’s remote the battery holder. • sensor. Please operate the remote Insert the battery with the correct control within angles about 60 degrees polarity facing up according to the...

  • Page 11: Rechargeable Battery

    Rechargeable Battery About Rechargeable Battery Pack Your portable DVB-T receiver can be connected with a lithium polymer rechargeable battery that attaches to the bottom of the unit. Your new battery should be fully charged before initial use. Charging time is normally about 4 hours. A fully charged battery delivers about 2.5-3 hours of use.
  • Page 12 Rechargeable Battery Battery Pack Attaching and Placement The unit’s power supply is the AC power adapter or the battery pack. The battery pack can also be used as a stand. Refer to the following steps for attaching the Battery Pack: Place the unit on a soft and smooth surface with its back cover facing up (to avoid scratching the screen).
  • Page 13 Rechargeable Battery Charging the Battery Pack The battery must be attached to the unit to charge it. Plug the Power Adapter into the unit’s DC 12V IN Jack, which is located on left Side of the unit. Plug the other end of the Power Cord into a wall Outlet.

  • Page 14: System Connections

    System Connections • Before plugging the power cord into an AC outlet, make sure that all other connections have been made as described below. • Always ensure that the unit, TV and any other electrical components are switched OFF before connecting to the unit. Power Supply Connection Connect the supplied adapter to the side of the unit in the jack marked “DC 12V IN”.

  • Page 15: Connecting To An Amplifier

    System Connections Connecting to an Amplifier The unit can be connected to an amplifier. Plug the A/V cable into the audio jack on the left side of the unit and plug the other end into an audio input on the amplifier. Please refer to the equipment’s manual before connecting.

  • Page 16: Connecting To A Headphone

    System Connections Connecting a Headphone Connect the headphone to the headphone jack on the left side of the unit. When headphones are connected, the speaker will be turned off automatically Connecting to DVB-T Antenna The unit is designed with an antenna input jack. Plug the DVB-T antenna into the jack on the right panel of the unit to receive...

  • Page 17: Connecting To External Antenna

    System Connections Connecting to external antenna Plug the provided external antenna into the signal input jack on the right panel of the unit, as shown below. Then slide the DVB /TV selector (left side of unit) to TV. Connecting to CATV antenna Connect one end of the provided connecting line to the signal input jack on the right panel of the unit, and the other end to the...

  • Page 18: Tv Setup

    TV Setup Preparation Connect the unit to the external antenna or CATV connecting cord. Connect the unit to a power supply。 Turn on the power of the unit. Switch the DVB /TV on the left panel to TV. Press the TV SETUP button to enter the setup menu.
  • Page 19 TV Setup Fine Tuning When reception quality is less than desirable, you can improve this with the fine tuning function. Press the SELECT buttons to select FINE, press the button to start fine tuning, when video and audio are at their best, stop the fine tuning and the program will be stored automatically.
  • Page 20 TV Setup Channel Editing Press the EDIT button on the remote control to enter the TV program edit mode. Then the screen will display as below. CHANNEL EDIT − − − − SWAP − − − − COPY − − CLEAR ALL Press the buttons to select different items.

  • Page 21: Dvb-T Setup

    DVB-T Setup Preparation 1. Connect the unit to the power. 2. Slide the DVB/TV selector switch to DVB. 3. Press the MENU button on the remote control to enter the DVB-T setup menu. 4. You can take the following steps to continue setup: Main Menu Press the MENU...
  • Page 22 DVB-T Setup Time Setting Press the buttons to select Time Setting, press the button to enter, the screen will display as below: There are three items for setting: TimeZone Setting, and DisplayTimer Setting. Press the buttons to select item, press the button to enter, press the Exit...
  • Page 23 DVB-T Setup A/V Setting This item is used to change the audio and video settings. Press the buttons to select Setting, press the button to enter, the screen will display as below: menu, press buttons to select items, press the buttons to adjust the values.

  • Page 24: Channel Setting

    DVB-T Setup When you have entered the PIN code, press the button to enter the menu shown below: menu, press buttons to select item. Press the EXIT button to return. 1. Change Pin Code In the menu, press the buttons to select Change Pin Code, press the button to...
  • Page 25 DVB-T Setup Channel Search Use the directional buttons to select Channel Search, press the button to confirm, the screen will display as below: In the channel search menu, press directional buttons to select the item you want to set up, press the button to enter the submenu.

  • Page 26: Channel List

    DVB-T Setup Sort Channel Select Sort Channel, press the button to enter, the screen will display as below: menu, press directional buttons select the desired item, press button to confirm. Press the EXIT button to return to the previous menu. This setting is used to sort channels from A-Z or from Z-A or to encrypt the selected channel.
  • Page 27 DVB-T Setup Press the directional or numeric buttons to select the desired item, press the button to enter. Press the button to delete the input. Press the EDIT button to enter the character or number list. In this list, press the directional buttons to select a character or a number, press the button to confirm input.

  • Page 28: Favorites List

    DVB-T Setup Then press the ENTER button to confirm and the program will be moved to the selected index number. Select Delete to delete the program. Press the button to select Delete, the screen will display a menu, according to the indication on the menu, press the ENTER button to confirm and delete the program;...

  • Page 29: Epg

    DVB-T Setup EPG (Electronic Program Guide) Select EPG, press the button to enter, the screen will display as below: Use the Booking function to receive a reminder when a program in this list is about to start: Use the button to select channel, and the buttons to select the program.

  • Page 30: Troubleshooting

    Troubleshooting Problem How To Check • Make sure the system connection is correct. There is no sound. • If headphones are plugged in, unplug them. • Make sure your system connection is correct. • Make sure the DVB-T antenna is connected. There is no picture.

  • Page 31: Specifications

    Specifications TFT screen size 7 inches TV System Frequency Response （DVB-T） 20Hz～20kHz ±2.5dB Audio Out （DVB-T） Analog Audio Out Output Level: 1.5V± , Load: 10KΩ Output Level:1V ±0.2, Load: 75Ω Video Out （DVB-T） Video Out Unbalanced Negative Power AC100-240V～50/60Hz Power Consumption ＜15W Dimension 200mmX154mmX41mm...

Table of Contents