Advertisement
Quick Links
Ceiling Fan Instruction Book
Models:
MIF123 MIF1233 MIF1234 MIF124 MIF1243 MIF1244
DESCRIPTION
Motor assembly
Instruction manual
Balancing kit
Hanging bracket
Wall control kit
IMPERIAL
SERIES
Screw kit
Blades
Cover
Light plate
Glass shade
QUANTITY
1
1
1
1
1
1
3 or 4
1 (for without light)
1
1
Advertisement
Related Manuals for Martec IMPERIAL SERIES
Summary of Contents for Martec IMPERIAL SERIES
- Page 1 IMPERIAL SERIES Ceiling Fan Instruction Book Models: MIF123 MIF1233 MIF1234 MIF124 MIF1243 MIF1244 DESCRIPTION QUANTITY Motor assembly Instruction manual Screw kit Balancing kit Hanging bracket Wall control kit Blades 3 or 4 Cover 1 (for without light) Light plate Glass shade...
- Page 2 ONLY install the remote controller kit that comes supplied by Martec Pty Ltd within package. DO NOT control operation of fan and light with any other remote control than what was approved by Martec Pty Ltd and supplied within this package, as this will void warranty.
- Page 3 Hanging bracket Canopy Hanging ball joint Jam Screw Wall control Down rod Cover Blade Housing Cover Liqht kit plate LED / 2 x E27 Glass shade With Light Without Light www.martecaustralia.com.au | 02 8778 7500 | sales@martecltd.com.au Page 3...
-
Page 4: How To Assemble
Secure the hanger bracket to ceiling beam or a suitable piece of timber inserted between the ceiling beams. Martec Pty Ltd recommends the bracket to be attached with two long screws as supplied within the package. There is a ball seat rubber cover need to be pressed into the bracket.(See Fig.2) Place circular shockproof gasket above the hanger bracket.Align the bracket and screw the hanger bracket to... - Page 5 HOW TO INSTALL THE LIGHT KIT PLATE (Version with light) The screw on the connecting disk is aligned with the keyhole of the lamp disk. After rotating clockwise to the bottom, tighten the screw with the screwdriver to ensure that the screw does not move Light Kit Plate Connector Light Kit Plate...
- Page 6 HOW TO INSTALL THE SHADE (Version with light) Turn the glass gently clockwise until it is not loose. For MIF1234 and MIF1244 models,pls install two E27 13W Max bulbs before install the glass shade. Fig.6 CCT (Colour changeable temperature) Please make sure the switch is off before changing the colour temperature.Simply flick LED plate (See Fig.7.) to select the desired colour temperature (3000K, 4000K or 5000K).
- Page 7 www.martecaustralia.com.au | 02 8778 7500 | sales@martecltd.com.au Page 7...