Programmable 5-2 day digital 1 stage heat cool thermostat (19 pages)
Summary of Contents for ICP TSTAT0404
Page 1
997-060180-3 Installation Instructions / User’s Manual TSTAT0404 and TSTAT0405 3 HEAT – 2 COOL Menu Driven Display 482 01 5300 01 November 2006...
Page 2
HOLD SETTING -- Vacation & Permanent This section describes the HOLD functions. You can program the thermostat to hold the temperature for a period of time. If you want to hold the temperature for a few hours or a few weeks, your thermostat can accommodate your schedule.
Page 3
If you selected TEMP ADJUST ONLY, you will only be able to adjust BACKLIGHT ON TIME the set point temperature. Any other operation will require the pin This thermostat has a two color backlight feature. Anytime a button is number to unlock the thermostat. pressed, the blue backlight stays on for a certain amount of time.
Page 4
want the fan to be energized. Ranges are OFF, or 5-20 minutes in 5 PROGRAM SETTINGS minute increments. MENU → SETTINGS → PROGRAM SETTINGS After entering this time and pressing the center button ■, the next screen is the amount of time the fan is OFF. Ranges are SMART RECOVERY 0 minutes, or 5-40 minutes in 5 minute INTERMITTENT FAN...
GENERIC WIRING DIAGRAMS INSTALLER ADVANCED FEATURES INFORMATION / 1 STAGE FURNACE / FAN COIL WITH 1 STAGE SAFETY CONSIDERATIONS Improper wiring or installation may damage thermostat. Wiring must conform to local and national electrical codes WARNING: Before installing thermostat, turn off all power to unit. There may be more than one power disconnect.
Page 6
VARIABLE SPEED INDOOR WITH 2 STAGE AC VARIABLE SPEED FURNACE WITH 2 STAGE HP (“DUAL FUEL”) VARIABLE SPEED INDOOR WITH 2 STAGE HP THERMOSTAT CONNECTIONS C - 24V Common for Control Circuit W2 – 2 Stage Heat R – 24V Supply for Control Circuit W1 –...
Page 7
Air Cleaner - Cumulative Run Time default is 0 hours (OFF) and Calendar Time is OFF. Values can range from 400-3600 hours for Cumulative Run Time (in 100 hour increments), or Calendar Time can be set to OFF, or 3-24 months (in 3 month increments). INPUT DEALER INFO Contractors are able to input Brand Name, Model Number, Contractor Name, and Contractor Phone number into these screens.