Connecting The Blind Spot Assistant - Dometic MagicWatch MWE 4004 Installation And Operating Manual

Connecting the blind spot assistant

8 Connecting the blind spot assistant
See fig. a
No. Description
1 Control electronics
2 Yellow/black cable: Connection to the cruise control
(4 pulses every 1 m, square wave, amplitude 5 – 32 V)
3 Red/grey cable (earth signal): Connection to a siren (accessory)
or a camera (accessory)
4 White/blue cable: Connection to parking brake (see below)
5 Connection to LED display:
Black cable
White cable
Red cable
6 Connection to external loudspeaker (accessory)
Yellow cable
Blue cable
7 Blue/black cable: Connection to ignition
8 Yellow/blue cable: Connection to passenger indicator (when
using siren only)
9 Connection switch:
Black cable
White cable
Red cable not connected
10 Sensors
11 Brown cable: Connection to earth
If a signal is not emitted from the parking brake:
➤ Connect the white/blue cable (fig. a 4) with the blue/black cable (fig. a 7).
I
NOTE
The manufacturer recommends applying some grease to the sensor
plug connections (not on the control module).
8
MWE4004
Plug socket
for plug
–
14
13
12
3
4
10
9
2
8
7
5
6
—
–
1
EN