Special Settings; Ip Address Settings - Sharp AR-NB3 Printing Manual

SPECIAL SETTINGS

IP address settings

This program is used to set the "IP ADDRESS", "SUBNETMASK", and "DEFAULT GATEWAY". The following
screen appears when this program is selected.
IP ADDRESS SETT-
INGS
IP ADDRESS
0 0 0 0
1
Enter the IP address, subnet mask,
and default gateway.
These move the cursor up and
down to select "IP ADDRESS",
[ ][ ] keys
"SUBNETMASK", and
"DEFAULT GATEWAY".
These move the cursor left
[ ][ ] keys
and right.
These are used to enter
Numeric keys
numbers.
[C] key ( ) Use this to cancel an entry.
This cancels an entry and
[BACK] key returns you to the previous
screen.
This cancels the setting and
returns the display to the
base screen of the mode that
[CA] key ( )
was in effect before the key
operator programs were
entered.
This cancels the setting and
returns the display to the
[SPECIAL base screen of the mode that
FUNCTION] key was in effect before the key
operator programs were
entered.
2
When you have completed all
settings, press the [OK] key.
The settings will be saved.
3
Turn off the machine power, wait for a
few seconds, and then turn on the
power again.
The new settings will take effect after the power is
turned on.
KEY OPERATOR PROGRAMS
5
33