G Fitting The Print Image To The Paper - Sharp AR-NB3 Printing Manual

FITTING THE PRINT IMAGE TO THE PAPER
The printer driver can adjust the size of the print image to match the size of the paper loaded in the machine.
Follow the steps shown below to use this function. The explanation below assumes that you intend to print a ledger
or A3 size document on letter or A4 size paper.
To open the printer driver, see
The "Fit To Paper Size" setting is not available when "N-Up Printing" is selected.
Note
PRINTING MULTIPLE PAGES ON ONE PAGE (page 10)
1
Click the [Paper] tab in the printer
driver setup screen.
2
Select the original size (Ledger or A3)
of the print image in "Paper Size".
3
Click on the [Fit to Page] checkbox.
When using the PS printer driver, select [Fit To
Paper Size] in "Zoom Setting".
"BASIC PRINTING" (page
or
or
3).
4
Select the size of the paper (Letter or
A4) that is loaded in the machine from
"Fit to Paper Size".
The size of the print image will be automatically
adjusted to match the paper loaded in the
machine.
Paper Size: Ledger or A3
Fit To Paper Size: Letter or A4
Ledger or A3 size
document
(Paper Size)
When using the PS printer driver, the print
Note
image can be enlarged or reduced by
means of numerical values. (The vertical
and horizontal ratios can be set separately.)
Select [XY-Zoom] in step 3, click the
[Width/Length] button, and adjust the ratios
in the screen that appears.
PRINTING FROM WINDOWS
Letter or A4 size
paper
(Fit To Paper Size)
1
11