Table of Contents
Advertisement
1.3 56F8323EVM Connections
An interconnection diagram is shown in
+12.0V DC/AC power supply to the 56F8323EVM board.
Figure 1-3. Connecting the 56F8323EVM Cables
Perform the following steps to connect the 56F8323EVM cables:
1. Connect the parallel extension cable to the Parallel port of the host computer.
2. Connect the other end of the parallel extension cable to P1, shown in
on the 56F8323EVM board. This connection allows the host computer to control
the board.
3. Make sure that the external +12V DC, 1.2A power supply is not plugged into a
+120V AC power source.
4. Connect the 2.1mm output power plug from the external power supply into P3,
shown in
Figure
5. Apply power to the external power supply. The green Power-On LED, LED13, will
illuminate when power is correctly applied.
1-4
Freescale Semiconductor, Inc.
Figure 1-3
Parallel Extension
Cable
PC
Connect cable
to Parallel / Printer port
1-3, on the 56F8323EVM board.
56F8323EVM User Manual
For More Information On This Product,
Go to: www.freescale.com
for connecting the PC and the external
56F8323EVM
P1
P3
External
with 2.1mm,
+12V
receptacle
Power
connector
Figure
1-3,
MOTOROLA
Advertisement
Table of Contents
