Magic-Pro Computer MP-6VIP-D User Manual page 34

MAGIC-PRO MP-6VIP-D
The chipset contains a PCI IDE interface with support from
two IDE channels. Select Enabled to activate the first and/or
the second IDE interface. Select Disabled to deactivate an
interface, if you install a primary and/or second add-on IDE
interface.
The choice: Enabled(default), Disabled.
Choose Enable(default), Disabled.
Choose Auto (default) or Mode 0~4. The BIOS will detect the
HDD mode type automatically when you choose Auto. You
need to set to a lower mode than Auto when your hard disk
becomes unstable.
Enabled (default): Turn on the onboard IDE function.
Disabled: Turn off the onboard IDE function.
This option allows you to decide to activate PCI Slot or AGP
first.
Choose PCI Slot(default), AGP.
Choose Enabled (default) or Disabled. Choose Disabled when
you use an ISA card with FDD function, or choose Enabled to
use the onboard FDD connector.
Choose Auto (default), 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/
IRQ3 or Disabled. Don’t set port 1 & 2 to the same value,
except when setting at Disabled.
Choose Auto (default), 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/
IRQ3 or Disabled.
33