Table of Contents
Advertisement
MAGIC-PRO MP-6VIP-D
Enabled: Turn on ACPI function.
Disabled (default): Turn off ACPI function.
Choose Max. Saving, User Define (default), Disabled, or Min.
Saving.
Choose Yes (default) or No. You need to choose Yes when
the operating system has the APM functions, otherwise
choose No.
Choose NA, Suspend, Standby (default) or Doze.
Choose Blank, DPMS or V/H Sync+Blank (default). You can
choose either DPMS or V/H Sync+Blank when ther monitor
has the Green function. You need to choose Blank when the
monitor has neither the Green function.
Assign the IRQ number to the modem which is being used so
that the ring signal can wake up the system. The default set-
ting is 3 (COM2).
Instant-Off (default): Turn off the system power at once after
pushing the power button.
Delay 4 Sec: Turn off the system power 4 seconds after push-
ing the power button (to meet PC97/98 spec)
Choose Off (default), On, Former Sts.
Off: Disable Power Lost Resume function.
On: Enable Power Lost Resume function.
Former Sts.: Use former status.
Time is adjustable from 1 to 15 minutes. When the set time
has elapsed, the BIOS sends a command to the HDD to power
down which turns off the motor.
23
Advertisement
Table of Contents
