Care & Cleaning - Breville BSM600 Instruction Book

Care & Cleaning
1. Before cleaning, make sure the unit is
completely cooled down and power switch
is positioned to off position.
2. Remove the burn chamber from the barrel.
Invert the burn chamber and tap on a solid
surface to remove any remaining wood
chips or ash. The burn chamber may be
cleaned by hand with warm soapy water or
by placing in a dishwasher.
3. Wipe the barrel clean if residue is visible.
4. Mesh filter can be cleaned with warm soapy
water and small brush as required.
5. Clean hose and tube ends in warm soapy
water as required.
6. Use damp cloth to clean the main unit.
Do not immerse in water.
NOTE
• Do not use unit without the burn chamber
present.
• Do not use unit if there is no mesh filter in
the burn chamber.
• Cannot be used to bubble through liquid –
the fan/motor is not strong enough.
• Hose can be stored in loop to contain smell.
• Remove the batteries if the device is not to be
used for a long period of time.
• Allow the unit to cool completely between
consecutive burns.
10
NOTE
Replace mesh filter if it becomes clogged.
Filter specification:
No.20 US Sieve Size [Ø19.0mm (¾ inch),
stainless steel 304].
WARNING
Resin may stain hands, handle parts
with caution.
Visit Breville.com to order more wood chips.