Getting Started - Ink Machines Scorpion User Manual

Instruction

Getting started

30°
InkMachines
Scorpion
Note! The product is not equipped with a power on button.
30°
Rev 2.0 / 2018-09-24
1. Make sure the workspace is thoroughly
cleaned and disinfected.
2. Use disposable gloves when preparing the
tattoo machine and work surface.
3. Cover the work surface with plastic film.
4. Hold the tattoo machine and turn grip 30°
counterclockwise to remove the grip from
the tattoo machine.
5. Sterilize the grip.
If disposable grips are used; discard the
grip and use a new one.
6. Fit the grip as shown in the picture.
7. Turn the grip 30° clockwise.
Note! The mark on the grip and
the mark on the tattoo machine
should be aligned when the grip
is correctly fitted to the tattoo
machine.
10 (29)