Table of Contents
Advertisement
13.
Chassis Intrusion connectors (2-pin INTRUSION)
This lead is for the intrusion detection feature for chassis with intrusion sensor or
microswitch. When you remove any chassis component, the sensor triggers and sends
a high level signal to these leads to record a chassis intrusion event. The default setting
is short CASEOPEN and GND pin by jumper cap to disable the function.
14.
OCUPCIE connectors (MPCIE_HD1-6)
Connects the PCIE signal to the NVME port on the backplane.
4-18
Chapter 4: Motherboard Information
Advertisement
Table of Contents
