AxeMotion PULSEMAKER User Manual page 3

W A R R A N T Y / L I A B I L I T Y
W A R R A N T Y / L I A B I L I T Y
The AxeMotion CNC modules are guaranteed against defects in materials and
workmanship for one full year from the date of pu rchase.
This warranty cannot apply if electrical connections and prescriptions of use
that are described in this guide have been strictly observed. An installation that
does not comply with these prescriptions invalidates the warranty for cons e-
quent damages.
AxeMotion CNC modules are provided without any warranty, even implicit,
concerning the results that can be obtained by their use, or the fact that any
user will be able to run them successfully, or regarding overall satisfaction with
the end products which can be obtained using the modules. The purchaser
explicitly recognises that he/she is solely responsible for choosing this module,
for running and using it and its related sof tware, and for obtaining the actual
results.
Connecting an AxeMotion CNC module requires skills in electrical wiring and
connecting, in motors and power stages, and in computerised motion control.
After integrating a CNC module, it is strongly recommended that the p urchaser
begins to get familiar with the machine control by making the first tests on
valueless workpieces.
Strict safety rules exist for building or using an automated machine tool. These
rules must be observed very accurately, and especially for the ele ctrical wiring,
the containment of mobile parts in a protection cabinet, the risks of injury
caused by impacts of chips or fragments of broken tools.
No liability can be accepted concerning the AxeMotion modules, their manufa c-
turer or distributor, for direct or indirect damages caused by a misuse or non
complying use, on persons who handle the module or the machine it drives, on
objects or materials subject to machine work, or on computer data subject to
the software processes.
Obviously none of the above terms and conditions may affect your statutory
rights under current law or legislation.
--3--