New England Arbors The Kensington Planter Box & Trellis Assembly Instructions

A S S E M B LY I N S T R U C T I O N S
The Kensington Planter Box & Trellis
Please read through before starting assembly.

Check Box for These Contents

In the event of missing or defective parts please call our customer service dept. at 1 800 282 9346 (Mon. to Fri. 8:00 AM to
4:00 PM EST).
(UK Tel: (44) 2038 687160 (Mon. to Fri. 1:00 PM to 10:00 PM GMT).
1. Pre-Assembled Back Panel with Trellis (1) -
2. Pre-Assembled Side Panels (2) -
3. Pre-Assembled Front Panel with Posts Connected (1) -
4. Floor Panels (2) -
10897
5. Post Caps (4) -
10611
6. 2 1/2" (64 mm) Stainless Steel Screws (4) -
7. 1 1/2" (38 mm) Stainless Steel Screws (8) -

General Information

• Read Instructions through carefully before beginning assembly.
• When assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
• We recommend an area approx 4'x 8' (1.2 m x 2.4 m) for unobstructed assembling.
• You should not need to use excessive force when assembling components.
65.3 in
(166 cm)
10895
10896
10894
20009-1
20005
6
Not to Scale
63.7 in
(162 cm)
18.375 in
(47 cm)
16 in
(41 cm)
23 in
(58 cm)
1
2
3
5
7
www.newenglandarbors.com
www.newenglandarbors.co.uk
2 in
(5 cm)
21.4 in
(54 cm)
16 in
(41 cm)
20 in
(51 cm)
4
V1.2/072717
1