Page 1
CommBox Motorised Stand User Manual Interactive Touchscreens...
Page 2
Motorised Height Adjustment (Using CommBox Control Hub) This applies when a CommBox Control Hub is installed. Use the Up and Down buttons on the touch interface to move the stand up and down. The stand will keep moving while the button is held, and will stop moving when the button is released.
Page 3
Moving and Securing the Stand The stand has four large castors to allow it to be moved around. When moving the stand, the preferred method is to push and pull the frame of the stand rather than the screen itself where possible. Always ensure that the brakes are all disengaged before trying to move the stand.
Need help?
Do you have a question about the CommBox and is the answer not in the manual?
Questions and answers