Fujitsu LifeBook E Series User Manual page 22

Wireless LAN.book Page 20 Wednesday, November 28, 2001 11:30 AM
I n t e g r a t e d W i r e l e s s L A N U s e r ' s G u i d e
Problem Possible Cause
Other computers The TCP/IP
are not displayed protocol is not
when the installed, or, the IP
[Network address is not set
Computer] icon is correctly.
double-clicked.
No communica-
tion due to poor
radio signal.
20
Possible Solution
If the TCP/IP protocol is installed, do the following to check
the IP address:
1. Windows 98:
Click [Start] -> [Programs] -> [MS-DOS Prompt].
Windows 2000:
Click [Start] -> [Programs] -> [Accessories] -> [Command
Prompt].
Windows XP:
Click [Start] -> [All Programs] -> [Accessories] ->
[Command Prompt].
2. Enter "IPCONFIG" command, and press [Enter].
(If your hard disk is C drive, enter
C:\>ipconfig)
Check that the IP address is correctly displayed under the IP
Address.
Example:
IP address: 10.0.1.3
Subnet Mask: 255.255.255.0
Default Gateway: 10.0.1.1
Shorten the distance between computers or remove visible
obstacles between them, and retry the connection.