Advertisement
Quick Links
Advertisement
Related Manuals for Midea YL1633S
Summary of Contents for Midea YL1633S
- Page 1 Water Dispenser Instruction Manual MODEL: YL1633S...
- Page 2 A: PART NAME B: SAFETY PRECAUTIONS C: GETTING STARTED D: DISPENSING WATER E: TROUBLESHOOTING F: CLEANING G: MACHINE INSTALLATION H: MAINTENANEC INSTRUCTION The packaging material used is recyclable; we recommend that you separate plastic, paper and cardboard and give them to recycling companies. To help preserve the environment, the refrigerant used in this product is R134a (Hydrofluorocarbon -HFC), which does not affect the ozone layer and has little impact on the greenhouse effect.
- Page 3 A: PART NAME PART NAME PART NAME Top cover Tap of normal water Push button of cold water Tap of hot water Push button of normal water Water collector Push button of hot water Heating switch Water Shortage Pilot Lamp Heating Pilot Lamp Power Supply Cord Cooling Pilot Lamp...
-
Page 4: B Safety Precautions
B: SAFETY PRECAUTIONS above 176 F The water cooler shall plug into a ground fault interrupter receptacle. -
Page 5: C: Getting Started
This appliance can be used by children aged from 8 years and above if they have been given supervision or instruc on concerning use of the appliance in a safe way and if they understand the hazards involved. Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised. - Page 6 Install water bo le 1. Open cabinet door. 2. Place probe assembly on probe hanger. 3. Place fresh bo le outside of cabinet. 4. Remove en re plas c cap from top of bo le. 5. Clean outside of new bo le with a cloth. 6.
- Page 7 D: DISPENSING WATER This unit has been tested and sani zed prior to packing and shipping. During transit dust and odors can accumulate in the tank and lines. Dispense and dispose at least one quart of water prior to drinking any water. Dispensing Cold Water A er setup, it will take up to 1 hour to get water to maximum cold temperature.
-
Page 8: E: Trouble Shooting
E: TROUBLE SHOOTING Water is leaking. Unplug dispenser, remove bo le and replace it. No water is coming from the spout. Make sure the bo le is not empty. If empty, replace it. Make sure to completely depress the pushbu on controls. Cold water is not cold. - Page 9 A en on: 1) The cleaning must be unber the guidance or professional staff. 2) The dispenser heats water to a temperature of approximately 185 F. It can cause severe burns. Please operate it carefully. 3. Sani zing The machine should be disinfected with a disinfectant according to the instruc on manual of the disinfectant and then clean it with water(see cleaning and draining instruc on) Generally this should be done every three months.
Need help?
Do you have a question about the YL1633S and is the answer not in the manual?
Questions and answers