Related Manuals for Sharedband Power Router 1
Summary of Contents for Sharedband Power Router 1
- Page 1 Sharedband Power Router 1 Quick Install Guide Quick Install Guide Sharedband Power Router 1...
- Page 2 Sharedband Router Setup Steps 1) Remove the Sharedband routers from their packaging and place them router in a suitable location 2) Use the included Ethernet cables to connect the routers’ ‘Internet’ ports to the modems/routers provided by your ISP(s) 3) Use the other included Ethernet cable to connect the routers’ ‘Unmanaged Switch’ ports to your unmanaged switch 4) Use the included power adapters to connect the routers’...
- Page 3 Sharedband aggregation service 9) Repeat steps 6-8 for each of the remaining Sharedband nodes. Each node has a different IP address which corresponds with the number marked on the underside of the router. For example, router two can be accessed by visiting http://192.168.3.2, router 3 (if applicable) can be accessed by visiting http://192.168.3.3, etc…...
-
Page 4: More Information
Input the IP address of the WAN-side router or an alternative destination of your choice into the ‘DNS Server’ field j) Click the ’Save and reboot’ button at the bottom of the page k) Once the Sharedband router has restarted, repeat steps a) to j) for any other routers you wish to reconfigure similarly More Information...
Need help?
Do you have a question about the Power Router 1 and is the answer not in the manual?
Questions and answers