Related Manuals for Sharedband Power Router 2+
Summary of Contents for Sharedband Power Router 2+
- Page 1 Sharedband Power Router 2+ Quick Install Guide Quick Install Guide Sharedband Power Router 2+...
- Page 2 Sharedband Router Setup Steps 1) Remove the Sharedband router from its packaging and place the router in a suitable location 2) Use the included Ethernet cables to connect the router’s ‘Internet’ ports to the modems/routers provided by your ISP. Please note that the number of the Internet interface that the Modem/Router is connected to will correspond to the Ethernet WAN connection interface number displayed within the GUI of the router 3) Use an included Ethernet cable to connect the router’s ‘LAN’...
- Page 3 Troubleshooting ‘WAN Interface Status’ If the WAN-side routers (provided by your ISP) you are connecting to the Sharedband routers don't operate DHCP, you will need to set a static IP on each Ethernet interface to enable communication. The following guidance explains how to achieve this: a) Open a web browser and visit the IP address of the router (default is 192.168.3.1)
-
Page 4: More Information
Input the IP address of the WAN-side router or an alternative destination of your choice into the ‘DNS Server’ field j) Click the ’Save and reboot’ button at the bottom of the page k) Once the Sharedband router has restarted, repeat steps a) to j) for any other WAN interfaces you wish to reconfigure More Information...
Need help?
Do you have a question about the Power Router 2+ and is the answer not in the manual?
Questions and answers