Booting Up for the First Time
Startup Wizard
When you power on the Wireless
1
NVR you will be prompted with
the following screen. Please follow
the instructions to complete the
Startup Wizard.
On the Password Creation screen, please note the following:
2
Write your
password here:
7
QSG-WNVR-V2.indd 8
Important... Please Read
Admin Account Creation
By default, the username will be admin. It must
remain admin upon your initial account configuration.
NOTE:
Password can be any alphanumeric combination
between 6 and 20 characters.
Recovery Email Address
Please ensure you provide a valid email address in
case you forget your account information.
Remember Your Password
Night Owl strongly recommends writing down your
password within the Quick Setup Guide. You will need
it every time you log into your Wireless NVR and to
remotely view on a Smart Device.
2017/8/23 10:25